PORSCHE CAYENNE S M OPTIONSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 - Front Axle/Steering (includes uncategorized and accessory items) FVDBS351991004
$1,119.80
Make a selection FVDBS352991004
$971.30
Make a selection
$10.73
Make a selection
$94.45
Make a selection 11599100HR
$544.50
Make a selection HEI600035A All optional equipment is ala carte with heigo. Please note: these are hand made to order. They typically take between 4-16 weeks. Every heigo cage is considered a special order item.
$183.70
Make a selection
$43.45
Make a selection
$67.58
Make a selection AP958170 Agency power is proud to release its super sport exhaust system for the 958 Porsche Cayenne s v8 2011 and up. the super sport exhaust is a axle system that gives your 4.8l v8 engine a real aggressive tone. made here in the usa, the exhaust saves close to 30lbs off the rear end of the vehicle. using 304 stainless steel and detail oriented tig welding, the exhaust system uses two small high flow mufflers which give it the sports car rumble. its reduced back pressure design gives the engine improved horsepower and torque with most noticeable improvement in throttle response. because of the reduced restriction, this exhaust horsepower gains can definitely be noticed in the mid to top rpm range.
$1,495.95
Make a selection HEI911002001S1 We deliver with dmsb-ons certificat ,incl. Tunneling supporting and diagonal bars for the work location motorsport you need this options: 600001 side rotection 600035 dash board panel faces optional : 600036 harness mounting tube only in steel 600006 upholstery 600014 diagonals bars with connecting joint every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,406.80
Make a selection FVD99661831MG Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 265kw (360hp) @ 7200rpm max. Torque - 370nm (273lbf ft) @ 5000rpm max. Speed - 302km/h max. Rpm - 7600rpm acceleration 0-100km/h - 4.8s tuning: max. Power - 276kw (375hp) @ 7000rpm max. Torque - 390nm (288lbf ft) @ 5000rpm max. Speed - 310km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while re...(choose a part on the right to read more)
$1,204.50
Make a selection HEI911002001S2 We deliver with dmsb-ons certificate with wel-in parts, harness bar, tunneling supporting & diagonal bar optional : 600006 upholstery every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,479.40
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD99610061A Kit includes: software genius flash tool, sport air filter genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 331kw (450hp) @ 5700rpm max. Torque - 620nm (457lbf ft) @ 3500-4500rpm max. Speed - 318km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.0s tuning: max. Power - 375kw (510hp) @ 5000rpm max. Torque - 745nm (550lbf ft) @ 4500rpm max. Speed - 328km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
$2,067.23
Make a selection HEI993001009A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar only weighs 22 lbs (10 kg) aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. ...(choose a part on the right to read more)
$1,760.00
Make a selection HEI993001005A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. They typically take between...(choose a part on the right to read more)
$1,401.40
Make a selection 87411541SL Koni has been in business for 150 years, involved in automobile dampers since 1932 and has produced adjustable telescopic dampers since 1945. A favorite among racers, and offered as a performance option by the factory. Konis are adjustable for fine tuning and carry a lifetime warranty. Koni sport shocks and struts provide a firm, controlled ride and flatter cornering and are also externally adjustable. These dampers can be adjusted, literally at the turn of a knob, a technique borrowed from formula-1 racing where koni dampers have dominated the field for years. Sold each, fits left front side. General Fitment911 1989-94
$336.95
Make a selection FVD200004 This set includes a revolutionary concept for protecting your tires while storing your vehicle. These tire savers have no recess! Independent tests have shown that a depression only makes sense if the fit is exact, typically this is not the case as there are so many tire options and variations in sizing. Why should you opt for tire saver? They are high quality, made in Germany and will prolong the life of your tires as they will not deform the tire with the weight of your vehicle. With other products that have a recess, owners experienced jacking difficulties or had to increase the air pressure in order to protect the tire in the recess. Those days will be over with the tire savers! Simply position the tire sav...(choose a part on the right to read more)
$297.00
Make a selection 93011025609R01 Rubber cap for the intake distributor on the m339 all-wheel drive option cars. Sold individually. 1 necessary per car. Like new
$15.40
Make a selection 82411272S Koni has been in business for 150 years, involved in automobile dampers since 1932 and has produced adjustable telescopic dampers since 1945. A favorite among racers, and offered as a performance option by the factory. Konis are adjustable for fine tuning and carry a lifetime warranty. Koni sport shocks and struts provide a firm, controlled ride and flatter cornering and are also externally adjustable. These dampers can be adjusted, literally at the turn of a knob, a technique borrowed from formula-1 racing where koni dampers have dominated the field for years. Sold each, fit either side. General Fitment911 1989-94
$238.95
Make a selection 930602015AX2ATK Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt (part # FVD 602 964 00) and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.
$504.11
Make a selection HEI914002001S We deliver with dmsb-ons certificate. For competition motorsports you will need these options: 600044 every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,625.70
Make a selection 91165911900SSI This stainless-steel heater box connecting sleeve is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 2 necessary per car. Please note: for models with automatic heat control (m424 option)
$62.70
Make a selection HEI911002006A1 We deliver with dmsb-ons certificate. Includes tunneling supporting and diagonal bars optional : 600006 upholstery
$2,274.80
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |